New Boxed APC rack tower smart UPS SUA5000RMI5U 5000va 5kva 230v with AP9630
This listing is for a new boxed APC smart UPS model number SUA5000RMI5U it is the uk 230v model and will supply 5000va 5kva and is designed to be hard wired into the mains. The unit can be used as either a floor standing tower or a rack mount unit. Please find full technical specifications below and if you have any questions do not hesitate to contact me. 4.0 KWatts / 5.0 kVA. Configurable for 220 : 230 or 240 nominal output voltage. Less than 5% at full load. Output Frequency (sync to mains). 47 - 53 Hz for 50 Hz nominal. (4) IEC Jumpers (Battery Backup). (2) IEC 320 C19 (Battery Backup).
(8) IEC 320 C13 (Battery Backup). 50/60 Hz +/- 3 Hz (auto sensing). Input voltage range for main operations. Input voltage adjustable range for mains operation.LED status display with On Line : On Battery : Replace Battery and Overload indicators. Audible and visible alarms : configurable delays. Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449. Audible noise at 1 meter from surface of unit. C-tick, CE, EN 50091-1, EN 50091-2, GOST, GS Mark, VDE.
APC Smart-UPS 5000VA 230V Rackmount/Tower. Intelligent and efficient network power protection from entry level to scaleable runtime. Ideal UPS for servers, point-of-sale, routers, switches, hubs and other network devices. Includes : CD with software , Documentation CD , Installation Guide , Rack mounting hardware , Rack Mounting support rails , Smart UPS signalling RS-232 cable , User Manual , Web/SNMP Management Card. Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.Provides notification of changing utility power and UPS power conditions. Periodic battery self-test ensures early detection of a battery that needs to be replaced. Boost and Trim Automatic Voltage Regulation (AVR). Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress. Provides temporary battery power when the utility power is out. Warns when a battery is not available to provide backup power. Ensures clean, uninterrupted power to protected equipment while batteries are being replaced. Provides remote power management of the UPS over the network. Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Enables a quick recovery from overload events. Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks. Customize UPS capabilities with management cards. Prolongs battery life by regulating the charge voltage according to battery temperature. Provides management of the UPS via a USB port (not available on all models). Provides management of the UPS via a serial port. Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition. Quickly understand unit and power status with visual indicators. Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR). Provides early-warning fault analysis on batteries enabling timely preventive maintenance. Provides early-warning fault analysis ensuring proactive component replacement. Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Protects connected loads from surges, spikes, lightning, and other power disturbances. Maximizes battery performance, life, and reliability through intelligent, precision charging. Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models). Automatic restart of loads after UPS shutdown. Automatically starts up the connected equipment upon the return of utility power. Smarter productivity with ability to tailor to your specific application needs.
Intuitive LCD interface provides clear information with the ability to configure the UPS locally with easy to use navigation keys. Over 15 different programmable settings including switched outlet group control allow for application specific settings, thresholds and notifications.Save time with easy and convenient remote accessibility. Network manageable via serial, USB or optional ethernet. Includes Powerchute® Business Edition Software for convenient monitoring and control, safe operating system shutdown and innovative energy management capabilities. Peace of mind that comes with full equipment compatibility and reliability of a leader. Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies.
- Type: Enterprise/Data Center UPS
- Number of Outlets: 10
- Features: Audible Alarm
- Brand: APC
- Model: Smart-UPS
- MPN: SUA5000RMI5U
- Voltage Compatibility: 230 V
- Max. Wattage: 4000 W
- Bundled Items: Software
- Surge Energy Capacity: 5000VA