NEW APC SMT750i Smart UPS 750VA LCD 230V BATTERY INCLUDED

NEW APC SMT750i Smart UPS 750VA LCD 230V BATTERY INCLUDED

NEW APC SMT750i Smart UPS 750VA LCD 230V BATTERY INCLUDED

NEW APC SMT750i Smart UPS 750VA LCD 230V BATTERY INCLUDED    NEW APC SMT750i Smart UPS 750VA LCD 230V BATTERY INCLUDED

APC Smart-UPS, 500 Watts / 750 VA, Input 230V / Output 230V , Interface Port SmartSlot, USB. Offers guaranteed battery backup and surge protection. Pure sine wave output on battery.

One switchable outlet group for individual load management - "SmartSlot" for network management card (optional). LCD interface with intuitive navigation keys.

Intuitive LCD interface Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. Predictive replace battery date Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning. Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Energy meter Provides actual kilowatt hours of usage for energy conscious users. Pure sine wave output on battery Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. High online efficiency Reduces utlility costs, generates less heat. SmartSlot Customize UPS capabilities with management cards. Cold-start capable Provides temporary battery power when the utility power is out. Temperature-compensated battery charging Prolongs battery life by regulating the charge voltage according to battery temperature.
Boost and Trim Automatic Voltage Regulation (AVR) Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models). Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced.

Disconnected battery notification Warns when a battery is not available to provide backup power. Network manageable Provides remote power management of the UPS over the network. Audible alarms Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.

LED status indicators Quickly understand unit and power status with visual indicators. Serial Connectivity Provides management of the UPS via a serial port. USB connectivity Provides management of the UPS via a USB port (not available on all models). User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR).

Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced. Predictive failure notification Provides early-warning fault analysis ensuring proactive component replacement. Resettable circuit breakers Enables a quick recovery from overload events. Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance. Adjustable voltage-transfer points Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.
Adjustable voltage sensitivity Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
500 Watts / 750 VA. Less than 5% at full load.
Output Frequency (sync to mains). 47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal. (6) IEC 320 C13 (2) IEC Jumpers. 50/60 Hz +/- 3 Hz (auto sensing).
Input voltage range for main operations. Input voltage adjustable range for mains operation. Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof. Multi-function LCD status and control console.
Alarm when on battery : distinctive low battery alarm : configurable delays. Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449. Audible noise at 1 meter from surface of unit.
C-tick, CE, EN 50091-1, EN 50091-2, VDE. 3 years repair or replace (excluding battery) and 2 year for battery. Includes: CD with software, Documentation CD, Smart UPS signalling RS-232 cable, USB cable. Sent Same Day Tracked Post. The item "NEW APC SMT750i Smart UPS 750VA LCD 230V BATTERY INCLUDED" is in sale since Saturday, September 1, 2018.

This item is in the category "Computers/Tablets & Networking\Power Protection, Distribution\Uninterruptible Power Supplies". The seller is "computers-do" and is located in Bradford, West Yorkshire. This item can be shipped to United Kingdom.

  • Brand: APC
  • Model: SMT750i
  • Surge Energy Capacity: 750VA
  • Max.

    Voltage-Amps: 750 VA
  • Type: Desktop/Free-Standing UPS
  • Voltage Compatibility: 230V
  • MPN: SMT750i

NEW APC SMT750i Smart UPS 750VA LCD 230V BATTERY INCLUDED    NEW APC SMT750i Smart UPS 750VA LCD 230V BATTERY INCLUDED