NEW APC Smart-UPS SRT6KXLI 6000VA 230V Uninterruptible Power Supply UPS With Rails
NEW APC Smart-UPS SRT6KXLI 6000VA 230V Uninterruptible Power Supply UPS W/ Rails. NEW - OPEN BOX, OPENED TO CHECK CONTENTS. 1 x NEW APC Smart-UPS SRT6KXLI 6000VA 230V Uninterruptible Power Supply UPS W/ Rails.10/100 BaseT Connection Connect the device to a network using a 10 or 100 BaseT connection Battery failure notification Provides early-warning fault analysis on batteries enabling timely preventive maintenance Green mode Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. LCD graphics display Text and mimic diagrams that display modes of operation, system parameters and alarms.
Low operating and maintenance costs with proven reliability and intelligent battery management. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement.Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. Avoids costly power problems by keeping your IT equipment and data protected and available. Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation , and zero transfer time to battery during power events. Peace of mind that comes with full equipment compatibility and reliability of a leader Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industrys most rigorous standards. Save time with easy and convenient remote accessibility. Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities. Safety-agency approved Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Cold-start capable Provides temporary battery power when the utility power is out. Resettable circuit breaker Easy recovery from overloads; no need to replace a fuse.Input power factor correction Minimizes installation costs by enabling the use of smaller generators and cabling. Generator compatible Ensures clean, uninterrupted power to protected equipment when generator power is used. Frequency and voltage regulation Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Power conditioning Protects connected loads from surges, spikes, lightning, and other power disturbances. Disconnected battery notification Warns when a battery is not available to provide backup power. Audible alarms Provides notification of changing utility power and UPS power conditions Automatic self-test Periodic battery self-test ensures early detection of a battery that needs to be replaced. Predicitive failure notification Provides early-warning fault analysis ensuring proactive component replacement. User-replaceable batteries Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR). Flash upgradeable firmware Install maintenance releases of firmware remotely using FTP. Rack/Tower convertible Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Plug-and-Play external batteries Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS. Network manageable Provides remote power management of the UPS over the network. InfraStruXure Manager Compatible Enables centralized management via the APC InfraStruXure Manager. SmartSlot Customize UPS capabilities with management cards. LED status indicators Quickly understand unit and power status with visual indicators. Serial connectivity Provides management of the UPS via a serial port. Automatic restart of loads after UPS shutdown Automatically starts up the connected equipment upon the return of utility power. Temperature-compensated battery chargingProlongs battery life by regulating the charge voltage according to battery temperature. Scalable runtime Allows additional run time to be quickly added as needed. Automatic internal bypass Supplies utility power to the connected loads in the event of a UPS power overload or fault. Hot-swappable batteries Ensures clean, uninterrupted power to protected equipment while batteries are being replaced Intelligent battery management Maximizes battery performance, life, and reliability through intelligent, precision charging. Output power capacity 6.0 KWatts / 6.0 kVAMax Configurable Power (Watts) 6.0 KWatts / 6.0 kVANominal Output Voltage 230VOutput Voltage Distortion Less than 2%Output Frequency (sync to mains) 50/60Hz +/- 3 HzOther Output Voltages 220, 240Load Crest Factor 3 : 1Topology Double Conversion OnlineWaveform type Sine waveOutput Connections. (4) IEC 320 C19 (Battery Backup).
(6) IEC 320 C13 (Battery Backup). (1) Hard Wire 3-wire (H N + G) (Battery Backup).(2) IEC Jumpers (Battery Backup). Bypass Internal Bypass (Automatic and Manual). Nominal Input Voltage 230VInput frequency 40 - 70 Hz (auto sensing)Input Connections Hard Wire 3 wire (1PH+N+G)Input voltage range for main operations 160 - 275VInput voltage adjustable range for mains operation 100 - 275 (half load)VOther Input Voltages 220, 240. Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproofTypical recharge time 1.5hour(s)Replacement BatteryAPCRBC140 Expected Battery Life (years) 3 - 5RBC Quantity 1Extendable Run Time 1Battery Volt-Amp-Hour Capacity 902Extended Run OptionsAPC-Smart-UPS-SRT-6000VA-230V RuntimeView Runtime Graph View Runtime Chart EfficiencyView Efficiency Graph. Interface Port(s) RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USBControl panel Multi-function LCD status and control consoleAudible Alarm Audible and visible alarms prioritized by severityEmergency Power Off (EPO) YesAvailable SmartSlot Interface Quantity 1. Maximum Height 432mm , 43.2cmMaximum Width 174mm , 17.4cmMaximum Depth 719mm , 71.94cmNet Weight 60.0kgShipping weight 67.0kgShipping Height 370mm , 37.0cmShipping Width 610mm , 61.0cmShipping Depth 960mm , 96.0cmColor BlackUnits per Pallet 6.0. Operating Environment 0 - 40 °C Operating Relative Humidity 0 - 95% non-condensing % Operating Elevation 0-3000metersStorage Temperature -15 - 45 °C Storage Relative Humidity 0 - 95% non-condensing % Storage Elevation 0-15000metersAudible noise at 1 meter from surface of unit 55.0dBAOnline thermal dissipation 1300.0BTU/hrProtection Class IP 20. VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by purchasers in the EU (excluding UK)who are VAT registered. The item "NEW APC Smart-UPS SRT6KXLI 6000VA 230V Uninterruptible Power Supply UPS With Rails" is in sale since Saturday, December 03, 2016.
This item is in the category "Computers/Tablets & Networking\Power Protection, Distribution\Uninterruptible Power Supplies". The seller is "itinstock" and is located in North London. This item can be shipped worldwide.
- Model: SRT6KXLI
- Brand: Dell
- Type: UPS
- MPN: SRT6KXLI