NEW APC Smart-UPS RT 5000VA (SURT5000XLI) UPS System

NEW APC Smart-UPS RT 5000VA (SURT5000XLI) UPS System

NEW APC Smart-UPS RT 5000VA (SURT5000XLI) UPS System    NEW APC Smart-UPS RT 5000VA (SURT5000XLI) UPS System

APC Smart-UPS RT 5000VA 230V. High density, double-conversion on-line power protection with scalable runtime. Includes: CD with software, Smart UPS signalling RS-232 cable, User Manual, Web/SNMP Management Card. Smart-UPS On-Line Features & Benefits. Provides remote power management of the UPS over the network. Provides management of the UPS via a serial port. Enables centralized management via the APC InfraStruXure Manager. Customize UPS capabilities with management cards. Quickly understand unit and power status with visual indicators. Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS. Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Install maintenance releases of firmware remotely using FTP. Provides notification of changing utility power and UPS power conditions. Provides early-warning fault analysis ensuring proactive component replacement. Warns when a battery is not available to provide backup power. Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR). Periodic battery self-test ensures early detection of a battery that needs to be replaced. Provides temporary battery power when the utility power is out. Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Easy recovery from overloads; no need to replace a fuse.

(Not available on Wall Tap SKUs). Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Protects connected loads from surges, spikes, lightning, and other power disturbances. Ensures clean, uninterrupted power to protected equipment when generator power is used.

Minimizes installation costs by enabling the use of smaller generators and cabling. Low operating and maintenance costs with proven reliability and intelligent battery management. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging.
Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. Save time with easy and convenient remote/network accessibility.
Network manageable via serial, USB or Ethernet. Includes Powerchute® Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities. Peace of mind that comes with full equipment compatibility and reliability of a leader. Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industrys most rigorous standards.
Avoids costly power problems by keeping your IT equipment and data protected and available. Network grade power conditioning protects from damaging surges and disruptive noise.

The double conversion architecture provides tight voltage regulation, frequency regulation , and zero transfer time to battery during power events. Prolongs battery life by regulating the charge voltage according to battery temperature.

Supplies utility power to the connected loads in the event of a UPS power overload or fault. Allows additional run time to be quickly added as needed. Maximizes battery performance, life, and reliability through intelligent, precision charging. Ensures clean, uninterrupted power to protected equipment while batteries are being replaced. Automatic restart of loads after UPS shutdown. Automatically starts up the connected equipment upon the return of utility power. 3.5kWatts / 5.0kVA. Configurable for 220 : 230 or 240 nominal output voltage. Output Frequency (sync to mains). 50/60 Hz +/- 3 Hz user adjustable +/- 0.1. (6) IEC Jumpers (Battery Backup). (8) IEC 320 C13 (Battery Backup).

(2) IEC 320 C19 (Battery Backup). Internal Bypass (Automatic and Manual). 50/60 Hz +/- 5 Hz (auto sensing). Input voltage range for main operations.

Input voltage adjustable range for mains operation. Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof. DB-9 RS-232, RJ-45 10/100 Base-T, Smart-Slot.
LED status display with load and battery bar-graphs and On Line : On Battery : Replace Battery : Overload and Bypass Indicators. Alarm when on battery : distinctive low battery alarm : overload continuous tone alarm. Full time multi-pole noise filtering : 0.3% IEEE surge let-through : zero clamping response time : meets UL 1449.
Audible noise at 1 meter from surface of unit. C-tick, CE, EN 50091-1, EN 50091-2, EN 55022 Class A, EN 60950, EN 61000-3-2, GOST, VDE. The item "NEW APC Smart-UPS RT 5000VA (SURT5000XLI) UPS System" is in sale since Wednesday, October 2, 2019. This item is in the category "Computers/Tablets & Networking\Power Protection, Distribution\Uninterruptible Power Supplies". The seller is "tmsworkshop" and is located in Warszawa, MAZOWIECKIE. This item can be shipped to European Union member countries, Russian federation.
  • Type: Enterprise/Data Center UPS
  • Voltage Compatibility: 220 V
  • Max. Wattage: 3500 W
  • Brand: APC
  • Model: Smart-UPS® RT 5000VA
  • MPN: S26361K915V50

NEW APC Smart-UPS RT 5000VA (SURT5000XLI) UPS System    NEW APC Smart-UPS RT 5000VA (SURT5000XLI) UPS System