EPI Rapid Deployment Data Centre RDDC DR Disaster Recovery Mobile Deployment
EPI Rapid Deployment Data Centre RDDC DR Disaster Recovery Mobile Deployment. 1 x EPI Rapid Deployment Data Centre RDDC DR Disaster Recovery Mobile Deployment. 2 x Airedale CR80V R410a Standard Condenser Air Cooler Unit. 1 x LG Air Conditioner for UPS Room. 1 x KENTEC Sigma XT Extinguishant K11031M2 Fire Control Panel.
External Dimensions 8800mm wide x 3000 mm Deep x 3100 mm High. Internal Dimensions 8600 mm Wide x 2800 mm Deep x 2900 mm High. Pod weight 4500kg when empty. The unit will has separate area with its own door at the end for UPS and Battery storage. The internal steel frame work is 60mm x 60mm x 6mm, the external frame work is manufactured from 5mm steel plate which is fully welded, the flooring is grade C 32mm partial board.
The RDDC is suitable for most small data centre deployments and can help resolve space, deployment time, build complexity, and cost challenges. Typical RDDC applications include data centre expansion, temporary data centre space, disaster recovery, data centre investment protection, highly secure data centres, and anytime there is a demand for data centre space at short notice. Easy to transport and relocate. Secure containment for IT or plant.
The SENTRY HPS HM/HT series uses on-line double conversion technology (VFI) with an isolation transformer on the inverter output. SENTRY HPS HM/HT is supplied with Watch&Save 3000 software as standard and can be remotely monitored using the PowerNetGuard system from anywhere in the world.Additional battery extension packs allow the standard battery runtime to be extended up to several hours. Minimum Impact on Supplies - Easy Source. Input current distortion <4% for the Sentry HPS with filter with sinusoidal absorption to remove the risk of resonance with other input supply users or phase shift capacitor sets. The absorbed current distortion is independent of input supply parameters such as impedance. This enables Sentry HPS to deliver maximum performance levels regardless of the installation environment. With these input features Sentry HPS can achieve significant savings in terms of sizing and power supply sources - isolation transformers and generators over less sophisticated power systems. Powershare output socket provides the load-shedding of the least critical load to maximise the back up time of the most critical servers. Hot Swappable battery from the front of the UPS allows easy and no-risks maintenance of the UPS. Additional Battery Box and extended charging current are available in tower 2200 and 3000 for very long back up time applications. Predictive battery testing to spot potential battery deterioration and failure. Deep discharge protection to reduce overall battery aging. Built-in automatic and manual battery test feature. Capability to install the UPS into any distribution system (neutral not required on rectifier input). Capability to separate the rectifier/bypass power networks and to power these from two separate sources, without Galvanic isolation.
Extremely high short-circuit current to ensure compatibility with the most difficult transformer applications (lighting, drives and industrial processes) and an isolation transformer on the inverter output. Full microprocessor control with no-break static and manual bypasses.0.8 power factor makes Sentry HPS suitable for powering ICT and industrial loads. High level diagnostics: event log with 128 messages, states, measurements and alarms - available from the built-in LCD in several languages. BACK FEED protection: to avoid energy feeding back into the mains supply should a fault occur. Solutions for low input current distortion. Closed loop parallel kit option (to be ordered with the unit). Sentry HPS can achieve efficiencies >98% thanks to a selectable Economy Mode which can be used in stable electrical environments to provide power supply continuity should the mains fail. Connect up to 8 units in parallel or N 1 redundancy, even of different power ratings. The UPS continue to work in parallel even if one of the interconnecting communication cables is disconnected (CLOSED LOOP). Compatible with TeleNetGuard for remote maintenance. Advanced, multi-platform communication for all operating systems and network environments: Watch&Save 3000 monitoring and shut-down software included, with SNMP agent, for Windows 9x, ME, NT 4.0,2000, XP, Vista and 2003 server; Mac OS X, Linux, Novell and Unix operating systems. The UPS is supplied with a cable for direct connection to the PC (Plug and Play). Installation slot for an Emergency Power Off (EPO) interface to allow the UPS to be switched off remotely in an emergency. Installation slot for connecting auxiliary contact bypass.
- Brand: EPI Airedale AROS SENTRY
- Model: DF50X2-EZR HPS HT 60 CR80V
- MPN: DF50X2-EZR HPS HT 60 CR80V
- Max. Wattage: 48000W
- Cooling Equipment - Airedale: DF50X2-EZR CR80V
- UPS: Sentry HPS HT 60 60kVA 48kW 400v