Brand New Boxed APC Rack mount Smart UPS 3000 SMT3000RMI2U &APC factory warranty

  

Please find full technical specifications below and if you have any questions do not hesitate to contact me. APC Smart-UPS 3000VA LCD RM 2U 230V. Provides the ability to adapt the UPS for optimal performance in specific power environments or generator applications. Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation. Provides notification of changing utility power and UPS power conditions. Automatic restart of loads after UPS shutdown. Automatically starts up the connected equipment upon the return of utility power. Periodic battery self-test ensures early detection of a battery that needs to be replaced. Provides early-warning fault analysis on batteries enabling timely preventive maintenance. Boost and Trim Automatic Voltage Regulation (AVR). Eliminates voltage fluctuations as a source of AV signal degradation and component power-supply stress. Provides temporary battery power when the utility power is out. Ensures clean, uninterrupted power to protected equipment while batteries are being replaced. Maximizes battery performance, life, and reliability through intelligent, precision charging.

Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. Provide easy-to-read status of the unit and utility power conditions.

Provides remote power management of the UPS over the network. Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups). Provides early-warning fault analysis ensuring proactive component replacement.

Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning. Pure sine wave output on battery.

Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Sequenced network shutdown and reboot. Customize network shutdown and reboot sequence of connected servers and UPSs. Use any Home Automation network to monitor and control the S20 through its RS-232 serial port.

For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks. Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding. Enables centralized management via StruxureWare Central. Prolongs battery life by regulating the charge voltage according to battery temperature.

Provides management of the UPS via a USB port (not available on all models). Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR). Designed for harsh electrical environments to save battery life. Peace of mind that comes with full equipment compatibility and reliability of a leader. Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industrys most rigorous standards. Smarter productivity with ability to tailor to your specific application needs. Intuitive LCD interface provides clear information with the ability to configure the UPS locally with easy to use navigation keys. Over 15 different programmable settings including switched outlet group control allow for application specific settings, thresholds and notifications. Save time with easy and convenient remote accessibility. Network manageable via serial, USB or optional ethernet. Includes Powerchute® Business Edition Software for convenient monitoring and control, safe operating system shutdown and innovative energy management capabilities. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. Avoids costly power problems by keeping your IT equipment and data safe and available. Network grade power conditioning protects from damaging surges and disruptive noise. Solid state automatic voltage regulation boosts low input voltage up to 30% and trims high voltage up to 12% without battery operation. Reliable battery back-up capacity to power through outages or gracefully shutdown systems.

Protects connected loads from surges, spikes, lightning, and other power disturbances. Gives higher application availability by correcting low and high voltage conditions without using the battery (not available on all models). Provides management of the UPS via a serial port. Quickly understand unit and power status with visual indicators. Actively let you know if the unit is on battery, if the battery is low or if there is an overload condition.

Other Output Voltages 220, 240. (1) IEC 320 C19 (Battery Backup). (8) IEC 320 C13 (Battery Backup).

Transfer Time 4ms typical : 8ms maximum. Input frequency 50/60 Hz +/- 3 Hz (auto sensing). Input Connections British BS1363A, IEC-320 C20, Schuko CEE 7/EU1-16P. Input voltage range for main operations 160 - 286 V.

Input voltage adjustable range for mains operation 151 - 302 V. Number of Power Cords 1. Other Input Voltages 220, 240. Battery type Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof. Typical recharge time 3 hour(s).

Control panel Multi-function LCD status and control console. Audible Alarm Alarm when on battery : distinctive low battery alarm : configurable delays. Available SmartSlot Interface Quantity 1. Maximum Height 86 , 8.6 cm. Maximum Width 480 , 48.0 cm.

Maximum Depth 683 , 68.3 cm. Net Weight 44.28 kg. Units per Pallet 8.0. Operating Environment 0 - 40 °C. Operating Relative Humidity 0 - 95 %.

Audible noise at 1 meter from surface of unit 55.0 dBA. Online thermal dissipation 348.0 BTU/hr. Approvals C-tick, CE, EN 60950, EN/IEC 62040-1-1, EN/IEC 62040-2, GOST, GS Mark, IRAM, VDE, WEEE. REACH REACH: Contains No SVHCs.

PEP Available in Documentation tab. EOLI Available in Documentation tab. The item "Brand New Boxed APC Rack mount Smart UPS 3000 SMT3000RMI2U &APC factory warranty" is in sale since Saturday, July 09, 2016.

This item is in the category "Computers/Tablets & Networking\Power Protection, Distribution\Uninterruptible Power Supplies". The seller is "iancewers" and is located in bicester, Oxfordshire. This item can be shipped to United Kingdom.

• Type: Enterprise/Data Center UPS
• Brand: APC
• Model: SMT3000RMI2U
• MPN: SMT3000RMI2U
• Max. Wattage: 2700W
• Number of Outlets: 9
• Features: Audible Alarm
• Bundled Items: Cables
• Manufacturer warranty: 2 years