APC SMC1500C Smart-UPS C Battery Backup & Surge Protector with SmartConnect

APC SMC1500C Smart-UPS C Battery Backup & Surge Protector with SmartConnect

APC SMC1500C Smart-UPS C Battery Backup & Surge Protector with SmartConnect

APC SMC1500C Smart-UPS C Battery Backup & Surge Protector with SmartConnect    APC SMC1500C Smart-UPS C Battery Backup & Surge Protector with SmartConnect

Designed for servers, point-of-sale, routers, switches, hubs, and other network devices, the Smart-UPS C Battery Backup & Surge Protector with SmartConnect from APC has a tower form factor and delivers intelligent and efficient network power protection from entry level to scalable runtime. It can provide 146 minutes of use at 50W, 90 minutes of use at 100W, 49.2 minutes of use at 200W, 32.5 minutes of use at 300W, 23.5 minutes of use at 400W, 18 minutes of use at 500W, 14.2 minutes of use at 600W, 11.5 minutes of use at 700W, 9.4 minutes of use at 800W, and 7.8 minutes of use at 900W. Included PowerChute Network Shutdown management software helps to provide unattended, yet proper shutdowns of network operating systems, and also included is a USB cable. APC SmartConnect makes the Smart-UPS more adaptable and easier to deploy, enabling you to view the status of your UPS through a secure web portal. Through this remote management interface, you'll receive automatic notifications, firmware updates, and advanced support. Provides temporary battery power when the utility power is out. Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.

Reduces utility costs, generates less heat. Provides key UPS status at a glance. There are multiple status indicators with load and battery bar graphs. Simulates utility power to provide a high degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics. Maximizes useful battery life by widening the input voltage window or tightening the output voltage regulation.

Provides the ability to adapt the UPS for improved performance in specific power environments or generator applications. Helps ensure the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment.
Provides management of the UPS via a serial port. Provides management of the UPS via a USB port.
Warns when a battery is not available to provide backup power. Provides remote power management of the UPS over the network. Actively lets you know if the unit is on battery, if the battery is low, or if there is an overload condition.

Quickly understand the unit and power status with visual indicators. Provides early-warning fault analysis on batteries, thus enabling timely preventive maintenance.

Increases availability by allowing a trained user to perform upgrades and replacements of the batteries, thus reducing the Mean Time to Repair (MTTR). Ensures clean, uninterrupted power to protected equipment while batteries are being replaced. Provides early-warning fault analysis, helping to ensure proactive component replacement. Enables a quick recovery from overload events. Maximizes battery performance, life, and reliability through intelligent, precision charging. Protects connected loads from surges, spikes, lightning, and other power disturbances. Boost and Trim Automatic Voltage Regulation (AVR). Gives higher application availability by correcting low and high voltage conditions without using the battery. A periodic battery self-test ensures early detection of a battery that needs to be replaced. Automatic Restart of Loads After UPS Shutdown. Total Outlets 8 x NEMA 5-15R. Protected Outlets 8 x NEMA 5-15R (Battery and Surge). Emergency Power Off (EPO) Support No.
Transfer Time 6 to 10 ms. Nominal Input Voltage 120 VAC.
Input Voltage Range 93 to 130 VAC. Input Voltage Adjustable Range 85 to 136 VAC. Input Frequency 50/60 Hz ± 3 Hz (Auto Sensing). Nominal Output Voltage 120 VAC.
Output Voltage Range 110 to 127 VAC. Output Frequency /60 Hz ± 3 Hz. Full-Load Runtime 7.8 Minutes.
Half-Load Runtime 20.4 Minutes. Operating Temperature 32 to 104°F / 0 to 40°C. Operating Humidity 0 to 95%. Storage Temperature 5 to 113°F / -15 to 45°C. Storage Humidity 0 to 95%. Operating Altitude 0 to 10,000' / 0.00 to 3048 m. Storage Altitude 0 to 50,000' / 0.00 to 15,240 m. Cable Length 6' / 1.83 m. Dimensions (W x H x D) 6.73 x 8.62 x 17.28 / 170.94 x 218.95 x 438.91 mm. Weight 44.3 lb / 20.1 kg. Package Weight 48.9 lb. Box Dimensions (LxWxH) 23 x 13 x 12.5. The item "APC SMC1500C Smart-UPS C Battery Backup & Surge Protector with SmartConnect" is in sale since Sunday, October 6, 2019. This item is in the category "Computers/Tablets & Networking\Power Protection, Distribution\Uninterruptible Power Supplies". The seller is "maxxa1" and is located in Oakton, Virginia.

This item can be shipped worldwide.

  • Compatible Brand: Universal
  • Color: Black
  • Maximum Power: 900 W
  • Brand: APC
  • Model: APC SMART
  • Voltage Compatibility: 120 V
  • Maximum Wattage: 900 W
  • Features: Cold Start
  • Type: Desktop/Freestanding UPS
  • Number of Outlets: 8
  • MPN: SMC1500C


APC SMC1500C Smart-UPS C Battery Backup & Surge Protector with SmartConnect    APC SMC1500C Smart-UPS C Battery Backup & Surge Protector with SmartConnect