APC Smart-UPS SRT 6000VA 230V SRT6KRMXLI

APC Smart-UPS SRT 6000VA 230V SRT6KRMXLI

APC Smart-UPS SRT 6000VA 230V SRT6KRMXLI

APC Smart-UPS SRT 6000VA 230V SRT6KRMXLI

APC Smart-UPS SRT 6000VA 230V SRT6KRMXLI

APC Smart-UPS SRT 6000VA 230V SRT6KRMXLI

APC Smart-UPS SRT 6000VA 230V SRT6KRMXLI

APC Smart-UPS SRT 6000VA 230V SRT6KRMXLI  APC Smart-UPS SRT 6000VA 230V SRT6KRMXLI

APC Smart-UPS SRT 6000VA 230V. APC Smart-UPS SRT 6000VA RM 230V. High density, double-conversion on-line power protection with scalable runtime. Connect the device to a network using a 10 or 100 BaseT connection. Provides early-warning fault analysis on batteries enabling timely preventive maintenance. Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection. Text and mimic diagrams that display modes of operation, system parameters and alarms. Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Provides notification of changing utility power and UPS power conditions. Provides early-warning fault analysis ensuring proactive component replacement. Warns when a battery is not available to provide backup power. Periodic battery self-test ensures early detection of a battery that needs to be replaced. Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR). Ensures clean, uninterrupted power to the loads when adding extra runtime to the UPS.

Install maintenance releases of firmware remotely using FTP. Peace of mind that comes with full equipment compatibility and reliability of a leader.

Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industrys most rigorous standards. Save time with easy and convenient remote accessibility. Network manageable via serial, USB or optional Ethernet.

Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities. Avoids costly power problems by keeping your IT equipment and data protected and available. Network grade power conditioning protects from damaging surges and disruptive noise.

The double conversion architecture provides tight voltage regulation, frequency regulation , and zero transfer time to battery during power events. Low operating and maintenance costs with proven reliability and intelligent battery management. Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement.
Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down. Prolongs battery life by regulating the charge voltage according to battery temperature. Supplies utility power to the connected loads in the event of a UPS power overload or fault. Maximizes battery performance, life, and reliability through intelligent, precision charging.

Allows additional run time to be quickly added as needed. Automatic restart of loads after UPS shutdown. Automatically starts up the connected equipment upon the return of utility power. Ensures clean, uninterrupted power to protected equipment while batteries are being replaced.

Easy recovery from overloads; no need to replace a fuse. Provides temporary battery power when the utility power is out. Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Protects connected loads from surges, spikes, lightning, and other power disturbances. Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Ensures clean, uninterrupted power to protected equipment when generator power is used. Minimizes installation costs by enabling the use of smaller generators and cabling. Provides remote power management of the UPS over the network. Provides management of the UPS via a serial port. Quickly understand unit and power status with visual indicators. Customize UPS capabilities with management cards. Enables centralized management via the APC InfraStruXure Manager. 6.0 KWatts / 6.0 kVA.
Output Frequency (sync to mains). (2) IEC Jumpers (Battery Backup). (4) IEC 320 C19 (Battery Backup).
(1) Hard Wire 3-wire (H N + G) (Battery Backup). (6) IEC 320 C13 (Battery Backup). Internal Bypass (Automatic and Manual). 40 - 70 Hz (auto sensing). Hard Wire 3 wire (1PH+N+G). Input voltage range for main operations. Input voltage adjustable range for mains operation. 100 - 275 (half load)V. Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof. RJ-45 10/100 Base-T , RJ-45 Serial , Smart-Slot , USB. Multi-function LCD status and control console. Audible and visible alarms prioritized by severity. 0 - 95% non-condensing %. Audible noise at 1 meter from surface of unit. The item "APC Smart-UPS SRT 6000VA 230V SRT6KRMXLI" is in sale since Monday, January 23, 2017. This item is in the category "Computers/Tablets & Networking\Power Protection, Distribution\Uninterruptible Power Supplies". The seller is "returns-excess" and is located in Poole. This item can be shipped to United Kingdom.
  • Type: Enterprise/Data Center UPS
  • Brand: APC
  • Model: SRT6KRMXLI
  • MPN: SRT6KRMXLI
  • Max. Wattage: 6000W
  • Voltage Compatibility: 230V

APC Smart-UPS SRT 6000VA 230V SRT6KRMXLI  APC Smart-UPS SRT 6000VA 230V SRT6KRMXLI