APC Smart-UPS 3000 VA Rack (19) (SMT3000RMI2U) UPS + Rails & Brand New Batteries
This is a used APC smart UPS model number SMT3000RMI2U and is the uk 230v model with LCD display. The UPS has been fitted with a complete set of brand new batteries and was then fully tested and confirmed to be in full working order. The unit is also supplied with a pair of rack mounting rails and the rack ears are already installed on the front of the ups, and input/output power leads are supplied as well so you have everything you need to properly install the ups in your rack connect it up and can start using it immediately. Please find full technical specifications below and if you have any questions do not hesitate to contact me. APC Smart-UPS 3000VA LCD RM 2U 230V.
Provides temporary battery power when the utility power is out. Warns when a battery is not available to provide backup power. Provides actual kilowatt hours of usage for energy conscious users. Gives higher application availability by correcting poor frequency and voltage conditions without using the battery. Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.Reduces utlility costs, generates less heat. Ensures clean, uninterrupted power to protected equipment while batteries are being replaced. Maximizes battery performance, life, and reliability through intelligent, precision charging. Provides clear and accurate information in multiple languages with the ability to configure the UPS locally with easy to use navigation keys. Provide easy-to-read status of the unit and utility power conditions. Provides proactive notifications of changing power or unit conditions and provides the user the ability to remotely control PMU functions. Turn on/off, reboot or shut down select outlet groups to save dispatching technicians to remote locations (for UPSs with switched outlet groups). Provides early-warning fault analysis ensuring proactive component replacement. Dynamically provides the month and year when battery replacement is recommended to aide in long term maintenance planning.
Pure sine wave output on battery. Simulates utility power to provide the highest degree of compatibility for active PFC (power factor corrected) servers and sensitive electronics.Ensures the product has been tested and approved to work safely with the connected service provider equipment and within the specified environment. Sequenced network shutdown and reboot. Customize network shutdown and reboot sequence of connected servers and UPSs. Use any Home Automation network to monitor and control the S20 through its RS-232 serial port. For information on how to communicate with the S20, see APC's Application Note #102. Crestron and AMX installers should visit their respective websites for information on how to integrate the S20 into those networks. Single outlet group that may be controlled separately from the UPS for discrete reboot of hung devices, sequenced on/off and non-critical load shedding. StruxureWare Data Center Expert compatible. Enables centralized management via StruxureWare Data Center Expert. Prolongs battery life by regulating the charge voltage according to battery temperature. Provides management of the UPS via a USB port (not available on all models). Increases availability by allowing a trained user to perform upgrades and replacements of the batteries reducing Mean Time to Repair (MTTR). Designed for harsh electrical environments to save battery life. Enables a quick recovery from overload events. Avoids costly power problems by keeping your IT equipment and data safe and available.
Network grade power conditioning protects from damaging surges and disruptive noise. Solid state automatic voltage regulation boosts low input voltage up to 30% and trims high voltage up to 12% without battery operation. Reliable battery back-up capacity to power through outages or gracefully shutdown systems. Save time with easy and convenient remote accessibility. Network manageable via serial, USB or optional ethernet.Includes Powerchute® Business Edition Software for convenient monitoring and control, safe operating system shutdown and innovative energy management capabilities. Low operating and maintenance costs with high efficiency, proven reliability and intelligent battery management.
Output Frequency (sync to mains). 47 - 53 Hz for 50 Hz nominal, 57 - 63 Hz for 60 Hz nominal. (3) IEC Jumpers (Battery Backup). (1) IEC 320 C19 (Battery Backup).(8) IEC 320 C13 (Battery Backup). 50/60 Hz +/- 3 Hz (auto sensing).
British BS1363A, IEC-320 C20, Schuko CEE 7/EU1-16P. Input voltage range for main operations. Input voltage adjustable range for mains operation.Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof. LED status display with On Line : On Battery : Replace Battery and Overload indicators, Multi-function LCD status and control console. Alarm when on battery : distinctive low battery alarm : configurable delays.
- Type: Enterprise/Data Center UPS
- Features: Audible Alarm
- Bundled Items: Cables
- Number of Outlets: 9
- Brand: APC
- Model: Smart-UPS
- MPN: SMT3000RMI2U
- Voltage Compatibility: 230 V
- Max. Wattage: 2700 W
- Surge Energy Capacity: 3000VA