APC FUJITSU Smart-UPS SRT 10kVA 10000VA 10kW 230V FJRT10KXLI Power Supply UPS
APC FUJITSU Smart-UPS SRT 10kVA 10000VA 10kW 230V FJRT10KXLI Power Supply UPS. In Good Condition And Full Working Order. 3.8 min at full load ¦ 11.5 min at half load. 1 x APC FUJITSU Smart-UPS SRT 10kVA 10000VA 10kW 230V FJRT10KXLI. 1 x Set of rails. Best in class power density: More real power in watts, 0.82 to 0.9 pf on the 1, 1.5, 2.2 and 3 kVA models. 0.85 pf on 5 kVA and Unity on 6 kVA 10 kVA units. High efficiency "Green Mode": Achieves 98% efficiency, which helps save utility and cooling costs without compromising performance or reliability. Graphical LCD display with multicolor backlight: Intuitive interface provides detailed and accurate information with ability to configure locally. Intelligent battery management: Temperature compensated charging extends life and advanced algorithms recommend replacement date. The UPS can inform the user which batteries need to be replaced and auto detect when additional battery packs are added. Built in energy meter: Measures energy use and displays UPS efficiency in various modes of operation for easy energy tracking. LCD graphics display - Text and mimic diagrams that display modes of operation, system parameters and alarms. ECO Mode - Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection.
Battery failure notification - Provides early-warning fault analysis on batteries enabling timely preventive maintenance. Rack/Tower convertible - Protects the initial investment in the UPS when migrating from tower to rack-mount environment. Embedded network management card with environmental monitoring (5 kVA 10 kVA models): Remote monitoring and control of the UPS and the environment via Ethernet connection while freeing up the SmartSlot so customers can add accessories for additional communication options. Switched outlet group(s): Ability to control a group of output load receptacles independent from the main UPS. Rebooting hung device without cycling the entire UPS.
Shedding of noncritical loads based on a variety of parameters (battery time, runtime remaining, and overload). Scheduled time off to conserve energy. Emergency power off (EPO): Remote UPS shutoff in the event of an emergency.
The UPS can accept normally open (NO) or normally closed (NC) contacts. Communication ports: Serial, USB, Ethernet, and SmartSlot for network accessory cards. Communication protocols: Modbus Serial, USB PowerSummary, HTTP, SNMP, and Telnet.
1:1, 3:1 input hard-wire options: Product can be wired for 3-PH or 1-PH input (230 V, 8 kVA, and 10 kVA models only). Dual input: Enables second input source to be connected to UPS bypass (230 V, 8 kVA, and 10 kVA models only). UPS - rack-mountable / external. Hardwire 5-wire (3PH + N + G), hardwire 3-wire (1PH + N + G). 6 x power IEC 60320 C13 ¦ 4 x power IEC 60320 C19.AC 230 V ± 3% - 50/60 Hz. 10 kW / 10000 VA. 1 x management (Ethernet) - RJ-45 ¦ 1 x management (USB) - 4 pin USB Type B ¦ 1 x EPO (emergency power off) ¦ 1 x serial - RJ-45. 1 (total) / 1 (free) x SmartSlot. C-Tick, VDE, IEC 60950, EN 50091-2, RoHS, EN 50091-1, REACH, EN 62040-2, IP20, EAC. VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by purchasers in the EU (excluding UK)who are VAT registered. The item "APC FUJITSU Smart-UPS SRT 10kVA 10000VA 10kW 230V FJRT10KXLI Power Supply UPS" is in sale since Saturday, June 30, 2018. This item is in the category "Computers/Tablets & Networking\Power Protection, Distribution\Uninterruptible Power Supplies".
The seller is "itinstock" and is located in North London. This item can be shipped to European Union member countries.
- Input Connectors: (3PH + N + G), (1PH + N + G)
- Fujitsu Part Number: S26361-K915-V102
- Model: FJRT10KXL SRT10KXLI
- Type: Rackmount
- Surge Energy Capacity: 10000VA
- MPN: FJRT10KXL SRT10KXLI
- Brand: APC
- Voltage Compatibility: 230V