APC FUJITSU Smart-UPS SRT 10kVA 10000VA 10kW 230V FJRT10KXLI Power Supply UPS
Rebooting hung device without cycling the entire UPS. Shedding of noncritical loads based on a variety of parameters (battery time, runtime remaining, and overload). Scheduled time off to conserve energy. Emergency power off (EPO): Remote UPS shutoff in the event of an emergency.
The UPS can accept normally open (NO) or normally closed (NC) contacts. Communication ports: Serial, USB, Ethernet, and SmartSlot for network accessory cards. Communication protocols: Modbus Serial, USB PowerSummary, HTTP, SNMP, and Telnet. 1:1, 3:1 input hard-wire options: Product can be wired for 3-PH or 1-PH input (230 V, 8 kVA, and 10 kVA models only). Dual input: Enables second input source to be connected to UPS bypass (230 V, 8 kVA, and 10 kVA models only).
UPS - rack-mountable / external. Hardwire 5-wire (3PH + N + G), hardwire 3-wire (1PH + N + G).6 x power IEC 60320 C13 ¦ 4 x power IEC 60320 C19. AC 230 V ± 3% - 50/60 Hz. 10 kW / 10000 VA. 1 x management (Ethernet) - RJ-45 ¦ 1 x management (USB) - 4 pin USB Type B ¦ 1 x EPO (emergency power off) ¦ 1 x serial - RJ-45. 1 (total) / 1 (free) x SmartSlot. C-Tick, VDE, IEC 60950, EN 50091-2, RoHS, EN 50091-1, REACH, EN 62040-2, IP20, EAC. VAT IS NOT PAYABLE BY PURCHASERS OUTSIDE THE European Union (EU) AND by purchasers in the EU (excluding UK)who are VAT registered. The item "APC FUJITSU Smart-UPS SRT 10kVA 10000VA 10kW 230V FJRT10KXLI Power Supply UPS" is in sale since Saturday, June 30, 2018.
This item is in the category "Computers/Tablets & Networking\Power Protection, Distribution\Uninterruptible Power Supplies". The seller is "itinstock" and is located in North London. This item can be shipped to European Union member countries.
- Input Connectors: (3PH + N + G), (1PH + N + G)
- Fujitsu Part Number: S26361-K915-V102
- Model: FJRT10KXL SRT10KXLI
- Type: Rackmount
- Surge Energy Capacity: 10000VA
- MPN: FJRT10KXL SRT10KXLI
- Brand: APC
- Voltage Compatibility: 230V